When battery is with very low power, the indicator light will flash 10 times when put hand, indicating that the battery needs to be charged urgently, the water should be forcibly turned off.
Product can not work normally when charge it and should turn off the handle of the faucet in advance.
USB cable and power adapter are not included with product itself.

Technical Parameters

Battery Capacity	3.7V Iithium battery (400m Ah)
Charging Specifications	Micro USB Charging (5V/ 500-1000mA)
Product Size	47mmx47mmx79mm
Standby Power Consumption	<0.2mW
Sensing Range	Side :1 -6cm; Bottomil -10cm
Applicable Water Pressure	0.05-0.8MPa
Fitting Faucet Nozzle	Male M241/ Female M221
Environmental Temperature	1-40°C
Environmental Humidity of Using	<95%RH
Water Efficiency Level	Level 1
Waterproof Level	IP65

Precautions for Usage

When the faucet is not used for a long time, please close the handle.
Please ensure that the water supply pressure is within the range of 0.05-0.8 MPa, otherwise there may be dripping or water leakage.
When using the product, please make sure that the USB charging protection plug is tightly fitted, in case gas enters and rusts the charging port

Details

FAQ

1 Water leakage after istallation
1.1 Please confirm whether there is a gasket at the inlet joint and whether the
gasket thickness is suitable.
1.2 Please confirm whether the water pressure is within the range of 0.05-0.8 MPa.
2 No water when sensing
2.1 Please confim whether the faucet handle and the inlet angle valve are open
and whether the water is stopped.
2.2 Please confirm whether the surface of the side and bottom sensor windows
are covered with water or covered with mist, ceaning it is ok.
2.3 Please confirm that there should be no obstacles within 30cm of the side and
bottom sensor windows.
2.4 Please confirm that the sensor window indicator flashes once when using.
If it flashes continuously or does not flash, please use it after charging.
3 Intermittent water or water can not stop
3.1 Please confirm whether there are large drops of water on the surface of the
side and bottom sensor windows or covered with mist, and wipe them dean
3.2 Please confirm that there should be no obstacles within 30cm of the side and
bottom sensor windows.

Warranty

1. 12 months after slling.,
2 Any quality ises arising from the fllowing actions are not covered by this
warranty.
2.1 Quality problems due to improper nstallation, replacement, repair,
and like these are not covered by this warranty.
22 Products for industrial and commercial usage.
23 The quality problems caused by misuse, abuse, neglect and the use of
nonoriginal accessories. Such as using a hard rag such as a steel ball or a strong
acidbase cleaner to clean the product, resulting in a sensing window and The
outer casing is scratched and corroded; the water pressure is not used in the
limited range of the product; the water quality is blocked or rusted due to poor
water quality etc.
2.4 Damage caused by other rresistible factors.

Product Tags:

USB Charging 0.1S 6cm Touchless Faucet Adapter

Infrared Forehead Thermometer

Digital Forehead Thermometer

Ear Forehead Thermometer

Wall Mounted Touchless Soap Dispenser

Motion Sensor Soap Dispenser

Baby Forehead Thermometer

Medical Grade Forehead Thermometer

Non Contact Forehead Thermometer

Body Infrared Thermometer

Infrared Temperature Gun

Infrared Digital Thermometer

Electronic Digital Thermometer

Walk Through Infrared Thermometer

Thermal Imaging Thermometer

Automatic Sensor Faucet

Touchless Faucet Adapter

USB Charging 0.1S 6cm Touchless Faucet Adapter

touchless faucet adapter

hand shower adapter

shower arm adapter